Alpha Products Inc - 351 Irving Drive, Oxnard, CA 93030, USA - Tel: 805-981-8666 - Fax: 805-988-6555 - Contact Us
Part Number
Model number
Taper
Value in Ohms
3RP/920LS-DA1
Select Part Numbers from the table then click on the “Request a Quote” Button to send your requirements for Price and Delivery. If you need custom product please use the “Send your Specs” Button
L1 = 10.0mm LB = 10.0mm L2 = 30.0mm F1 = 8.0mm
Electrical Characterisics
Mechanical Characteristics
Resistance Values
10 KOhm ~ 500 kOhm +/- 20%
Total Rotational Angle
300 deg +/- 10 deg
Resistance Taper
A, B, C
Rotational Torque
10 ~ 200 gf/cm
Residual Resistance
0.1% max of total resistance
Rotational Stop Strength
outer shaft = 4 kgf/cm inner shaft = 3 kgf/cm
Rated Power
taper A, C = 0.025W taper B = 0.05W
Push / Pull Strength
4 kgf/cm / 3 kgf/cm
Operating Voltage
taper A, C = 25V AC max taper B = 50V AC max
LIfe
10,000 cycles
Slide Noise
100mV max
Insulation Resistance
100MOhm min @250V DC
Gang Error
3dB max
Disclaimer: Alpha Products, Inc. makes no warranties, expressed or implied, including warranties of merchant ability or fitness /suitability for a particular purpose or application. Under no circumstances shall Alpha Products, Inc. be liable for incidental, consequential, or other damages from alleged negligence, breach of warranty, strict liability, tort, contract, or any other theory, arising out of the use, non use, or handling of these products. Alpha Products Inc. reserves the right to discontinue, modify, amend and / or change any product, specification or service at any time without any obligation of providing any notice.
Site Created by: Tarola International / USA Hosted by Tarola.Net - Copyright 2006-2014. Copying or Duplicating of any part of this website in any form without written permission form Alpha Products Inc. is strictly forbidden
NOTE
Our webhosting provider is currently unable to transfer the data from our webforms to us by email!
To be sure we receive your requests, please fill the form then copy it and email it to
